Single Shearing Machine for Pile Fabric

1.DESCRIPTION OF MACHINE 

THIS MACHINE IS SITUATABLE FOR CUTTING PILE FABRIC SUCH AS FLANNEL, POLAR FLEECE AND FUR FLEECE FABRIC ETC... 

ADJUSTMENT：BY ADJUSTING THE SCREW (SEE FIGURE TWO) SHEARS CYLINDER MOVES FORWARD, THE CYLINDER CENTER IS LOCATED IN FRONT OF BLADE EDGE ABOUT 1MM (SEE FIGURE FOUR)，TURN THE ADJUSTING NUT (SEE FIGURE TWO), ADJUST THE CYLINDER, BLADE BETWEEN THE CONTACT PRESSURE. START SHEARS CYLINDER  FORWARD BUTTON, SO THAT THE SHEARS CYLINDER LOW-SPEED FORWARD ROTATE A FEW MINUTES , REMOVE THE TINY BURRS ON BLADE, CHECK THE CYLINDER CONTACT WITH BLADE WIDTH, ENSURE THE CONTACT WIDTH IN THE LEFT, MIDDLE AND RIGHT WITHOUT SIGNIFICANT DIFFERENCE, NOTE: THE ABOVE OPERATION DATA FOR CONVENTIONAL VALUE, THE USER CAN ACCORDING TO DIFFERENT FABRIC ADJUSTMENT OF THESE DATA, OR CONSULT OUR COMPANY AFTER-SALES SERVICE, TO ENSURE THE OPTIMAL USE EFFECT.

2.SPECIFICATIONS OF MACHINE 

3. APPLICATION OF MACHINE