Oil Hearing Stenter Machine for Polyester Fabric

1.DESCRIPTION OF MACHINE 

THE STENTER MACHINE IS USED FOR FIXING THE WIDTH OF FABRIC AND MAKE THE FABRIC DRY. 

MAINTAINENCE:

BEARING:

LUBRICATION=BEARING SHOULD BE FULL OF LUBRICATING GREASE TO MAKE SURE IT KEEPS AT GOOD CONDITION.

TRIAL ROTATION -INSPECT BEARING CONDITION DURING TRIAL ROTATION, AND CHANGE THE BEARING WHICH IS NOT GOOD.

MOTOR:

OBVERSE MOTOR AND THE PARTS FIXING AND CONNECTED TO IT,CHECK ANY DAMAGE AREA, MAKE SURE IT’S INSTALLED TIGHTLY. ESPECIALLY MORE ATTENTION TO THE CABLE TERMINAL ISOLATE PROTECTION NO ANY DAMAGE.

CLEAN- CLEAN THE COOLING VANE OF MOTOR AND KEEP DRY FOR PROTECTION RAIL.

TRANSMISSION:

OBVERSE TRANSMISSION AND THE FIXTING POINT IF ANY DAMAGE, MAKE SURE IT’S INSTALLED TIGHTLY.

LUBRICATION- GEAR BOX SHOULD BE FULL OF LUBRICATING GREASE, THE LUBRICATING GREASE ONLY NEEDS TO CHANGE WHEN MACHINE GET BIG REPAIR AND MAINTAINENCE.

HAND WHEEL ADJUSTMENT DEVICE:

OBVERSE- COMPLETELY INSPECT ADJUSTMENT DEVICE AND ITS FIXING POINT IF ANY DAMAGE, MAKE SURE IT’S INSTALLED TIGHTLY.

LUBRICATION- IF NEEDS, CLEAN THE POSITION CONNECTED TO GLUE CHAIN, THEN ADD SOME LUBRICATING GREASE.

EXPANDING DEVICE:

OBVERSE- INSPECT THE EXPANDING DEVICE IF ANY DAMAGE, MAKE SURE IT’S FIXED INTO BEARINGS.

ESPECIAL NOTE:FOR OUR DIFFERENT MODEL OF MACHINE, MAY ADOPT DIFFERENT CENTERING DEVICE,BUT THE FUNCTION IS SAME,PLEASE GET NOTED.

2.SPECIFICATION OF MACHINE 

3.APPLICATION OF MACHINE