Gas Hearing Stenter Machine for Polyester Fabric

1.DESCRIPTION OF MACHINE 

THE STENTER MACHINE IS USED FOR FIXING THE WIDTH OF FABRIC AND MAKE THE FABRIC DRY. 

THE STENTER MACHINE USE GAS AS HEATING SOURCE. AND IT IS MORE ENVIRONMENT FRIENDLY THAN OIL HEATING.

MAINTAINENCE:

CLEAN=USE PROPER EQUIPMENT TO CLEAN THE ROLLERS,ESPECIALLY MORE ATTENTION TO THE FABRIC WASTE ON THE ROTARY PARTS OF MACHINE.DON’T USE HARD AND SHARP TOOL TO CLEAN THE ROLLERS TO AVOID DAMAGE ON ITS SURFACE.

BEARING:

LUBRICATION=BEARING SHOULD BE FULL OF LUBRICATING GREASE TO MAKE SURE IT KEEPS AT GOOD CONDITION.

TRIAL ROTATION -INSPECT BEARING CONDITION DURING TRIAL ROTATION, AND CHANGE THE BEARING WHICH IS NOT GOOD.

HAND WHELL ADJUSTMENT: 

OBVERSATION - COMPLETELY INSPECT ADJUSTMENT UNIT AND CHECK IF ANY DAMAGE FOR ITS FIXING AND GLUE CHAIN, MAKE SURE IT’S FIXED TIGHTLY.

LUBRICATION- IF ANY NEEDS, FIRST CLEAN THE POSITION CONNECTED TO GLUE CHAIN, THEN GET SOME LUBRICATING GREASE ON IT.

EXPANDING UNIT

EXPANDING ROLLER:

OBVERSATION - INSPECT IF ANY DAMAGE FOR EXPANDING ROLLER, MAKE SURE IT’S FIXED TIGHTLY INTO BEARINGS.

CLEAN - USE PROPER EQUIPMENT TO CLEAN ROLLERS, EXPECIALLY MORE ATTENTION TO THE FABRIC WASTE ON THE ROTARY PARTS OF MACHINE. DON’T USE HARD AND SHARP TOOLS TO CLEAN ROLLERS TO AVOID DAMAGE.

2.SPECIFICATION OF MACHINE 

3.APPLICATION OF MACHINE